Closing The Product Manager - HP 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Table 1–1: Operating Status - Status Bar and Switch Status (Continued)
Symbol
Messages display to the right of the status symbol as you move the cursor over options
under the menu bar menus. These messages provide additional details about tasks that
you can perform through the menu option.

Closing the Product Manager

To close the Product Manager, use the following steps:
1. To close the Product Manager, do one of the following:
— Select Close from the Product menu on the menu bar.
— Click the X button at the top right corner of the Product Manager window.
— Double-click the icon at the top left corner of the Product Manager window,
or right-click the icon and select Close from the menu that displays.
edge switch 2/24 product manager user guide
Status Switch Status
Bar Table Text
Blinking NOT
Red and OPERATIONAL
Yellow
Diamond
Gray Never Connected
Square
Link Timeout
Protocol Mismatch
Duplicate Session
Unknown Network
Address
Incorrect Product
Type
Product Manager Overview
Meaning
A critical failure prevents the
switch from performing
fundamental switching
operations.
All fans failed.
All installed ports failed.
Both power supplies failed.
Switch status is unknown. This
occurs if the Ethernet network
connection between the
HAFM server and the switch
cannot be established or if the
CTP fails. Refer to No Link
Status on page 2-2 for details
on the status table text.
1–31