Configure Threshold Alerts - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

Note:
Manager application. Call-home event notification can be active for some switches
and inactive for others.
4. Click Send Test. A call-home test message is sent.
5. Click OK to close the dialog box.
6. Maximize the Hardware View page.
7. At the Hardware View, select Enable Call Home Notification from the

Configure Threshold Alerts

A threshold alert notifies users when the transmit (Tx) or receive (Rx) throughput
reaches specified values for specific switch ports or port types, (E_Ports or
F_Ports).
You are notified of a threshold alert in four ways:
Use the Threshold Alerts option on the Configure menu to configure the
following:
Edge Switch 2/24 Installation Guide
The enable function must also be activated for each switch through the Element
Maintenance menu. A check mark appears in the check box to indicate
call-home event notification for the switch is enabled, and the menu closes.
A yellow triangle that displays on the port in the Port Card View.
A yellow triangle that displays on the port in the Hardware View.
A yellow triangle that displays in the Alert column of the Port List View.
A yellow triangle that displays by the Threshold Alerts field in the Port
Properties dialog box.
Detailed threshold alert data recorded in the Threshold Alert Log.
Name for the alert.
Type of threshold for the alert (Rx, Tx, or either).
Active or inactive state of the alert.
Installing and Configuring the Edge Switch 2/24
81