Installing And Removing A Pci Add-In Card; Installing A Pci Add-In Card - Intel SR1530AH - Server System - 0 MB RAM User Manual

11. Re-install the processor air duct. For instructions, see
Duct" on page
12. Install the server system cover. For instructions, see
Cover".
13. Plug all peripheral devices and the AC power cable into the server.

Installing and Removing a PCI Add-in Card

Caution: The add-in cards are NOT hot swappable. Before removing or replacing an add-in card,
you must first take the server out of service, turn off all peripheral devices connected to
the system, turn off the system by pressing the power button, and unplug the AC power
cord from the system or wall outlet.

Installing a PCI Add-in Card

1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System Cover" on page
4. Remove the PCI riser assembly. For instructions, see
Assembly" on page
64
33.
iii.
28.
60.
®
Intel Server System SR1530AH / SR1530AHLX / SR1530HAHLX
"Installing the Processor Air
"Installing the Server System
"Removing the Server
"Removing the PCI Riser
"Safety