Figure 78. Disconnecting System Blower Fans (Sr1530Ah / Sr1530Ahlx) - Intel SR1530AH - Server System - 0 MB RAM User Manual

Figure 78. Disconnecting System Blower Fans (SR1530AH / SR1530AHLX)

6. Remove the three screws that hold the fan bracket in place. Save these screws. You
will re-install them later. See letter "A" in the figure below.
7. Remove the fan cable from beneath the clip at the front of the fan bracket. See letter
"B" from the figure.
8. Lift the fan bracket from the server. Lift the bracket at an angle, front of the bracket
first, to clear the hard disk drive brackets. See letter "C".
®
Intel Server System SR1530AH / SR1530AHLX / SR1530HAHLX
A B
A B
AF001175
85