11. Connect the power supply cables to the server board and peripherals. See
— A: 2x4 power connector
— B: 2x12 main power connector
— C: Daisy chain cable to:
.
Figure 69. Connecting Power Cables (SR1530AH / SR1530AHLX)
12. Install the server system cover. For instructions, see
Cover".
13. Plug all peripheral devices and the AC power cable into the server.
76
✧ HDD1 power connector, if a hard drive is installed here. Use the connector on
cable that is closest to power supply
✧ HDD0 power connector, if a hard drive is installed here. Use the center
connector on the cable
✧ Optical drive power, if an optical drive is installed. Use the end connector on
the power supply
C
Intel
B
®
Server System SR1530AH / SR1530AHLX / SR1530HAHLX
A
AF000969
"Installing the Server System
Figure
68.