Figure 24. Installing The Memory - Intel SR1530AH - Server System - 0 MB RAM User Manual

4. Locate the DIMM sockets. See
5. Make sure the clips at both ends of the DIMM socket(s) are pushed outward to the
open position. See letter "A" in
6. Holding the DIMM by the edges, remove it from its anti-static package.
7. Position the DIMM above the socket. Align the notch on the bottom edge of the
DIMM with the key in the DIMM socket. See letter "B" in the figure.
8. Insert the bottom edge of the DIMM into the socket. See letter "C" in the figure.
9. When the DIMM correctly positioned, push down on the top edge of the DIMM
until the retaining clips snap into place.
10. Make sure the clips are firmly in place. See letter "D" in the figure.
11. Install the server system cover. For instructions, see
Cover".
®
Intel Server System SR1530AH / SR1530AHLX / SR1530HAHLX
Figure
C
D
A

Figure 24. Installing the Memory

Figure
24.
B
DIMM 1A
Socket
DIMM 2A
Socket
24.
"Installing the Server System
DIMM 2B
Socket
DIMM 1B
Socket
AF000534
35