Installing The Server Board; Figure 64. Installing The Server Board - Intel SR1530AH - Server System - 0 MB RAM User Manual

Installing the Server Board

1. Observe the safety and ESD precautions at the beginning of this book. See
Information" on page
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
System Cover" on page
4. Remove the processor air duct. For instructions, see
Duct" on page
5. Remove the PCI riser assembly. For instructions, see
Assembly" on page
6. Place the server board into the server system as shown by letter "A" in the figure
below.
7. Attach the server board with nine screws. See letter "B" in the figure.
®
Intel Server System SR1530AH / SR1530AHLX / SR1530HAHLX
iii.
28.
31.
60.
B
A

Figure 64. Installing the Server Board

"Safety
"Removing the Server
"Removing the Processor Air
"Removing the PCI Riser
AF000678
69