Figure 44. Attaching The Interposer Board; Figure 45. Attaching The Optical Drive To The Brackets - Intel SR1530AH - Server System - 0 MB RAM User Manual

8. Attach the optical drive to the brackets, using the four screws as shown by
Figure
9. Slide the optical drive assembly in through the front of the chassis, as shown by
letter "A in
10. Reinstall the screw that you removed in step 6.
11. A daisy chain cable is used for the hard disk drives and the optical drive. Connect
the end connector on the daisy chain cable to the power connector on the optical
drive. See letter "C" in the figure below.
52

Figure 44. Attaching the Interposer Board

45.

Figure 45. Attaching the Optical Drive to the Brackets

Figure 46.
®
Intel Server System SR1530AH / SR1530AHLX / SR1530HAHLX
B
A
AF001186
AF000672