Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP SERVICES CONFIGURATION GUIDE 2010-10-01 Configuration Manual page 80

JunosE 11.3.x IP Services Configuration Guide
show ip route slot
54
Example 3
host1#show ip route summary
Unicast routes:
8 total routes, 576 bytes in route entries
0 isis routes
0 rip routes
3 static routes
2 connected routes
1 bgp routes
0 ospf routes
2 other internal routes
0 access routes
0 internally created access host routes
Last route added/deleted: 2::4/128 by BGP
At MON FEB 04 2008 14:18:25 UTC
Unicast routes used only for Multicast RPF check:
0 total routes, 0 bytes in route entries
0 isis routes
0 rip routes
0 static routes
0 connected routes
0 bgp routes
0 ospf routes
0 other internal routes
0 access routes
0 internally created access host routes
0 mbgp routes
0 dvmrp routes
Last route added/deleted: null by Invalid
At MON FEB 04 2008 14:18:04 UTC
MPLS tunnel routes (not used for forwarding):
3 total routes, 216 bytes in route entries
1 bgp tunnel routes
1 ldp tunnel routes
1 rsvp tunnel routes
Last route added/deleted: 2::4/128 by BGP Tunnel
At MON FEB 04 2008 14:18:26 UTC
See show ip route.
Use to display the interface and next hop for an IP address in the routing table of a line
module specified by the slot it occupies.
slotNumber—Number of the slot that contains the line module for which the
information is displayed
ipAddress—IP address to look up in the routing table
Field descriptions
IP address—Address that is reachable through the interface
Copyright © 2010, Juniper Networks, Inc.