Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP SERVICES CONFIGURATION GUIDE 2010-10-01 Configuration Manual page 132

JunosE 11.3.x IP Services Configuration Guide
show ip flow export
show ip flow sampling
106
Dst. Intf—Destination interface of sampled packets
Summary
Total Flows Processed—Total number of flows processed
Total Packets—Total number of packets sampled
Total Bytes—Total number of bytes received
See show ip cache flow aggregation.
Example—Aggregation cache flow output
host1#show ip cache flow aggregation as active brief
29140 packets sampled.
Src.AS Dst.AS
------------- - ---------
400 100
100 400
------------------ Summary ---------------------
Total Flows Processed: 2
Total Packets 1053
Total Bytes 1078962
------------------------------------------------
Use to display configuration values for IP flow cache export.
Example
host1#show ip flow export
Flow export is enabled using version 5 format.
Exporting to 10.0.0.2 port 9898 using source ip interface
GigabitEthernet5/0/0.
See show ip flow.
Use to display configuration values for IP flow cache sampling.
Example
host1#show ip flow sampling
Flow sampling is enabled
'Packet Interval' sampling mode is configured.
1 out of every 1000 packets is being sampled.
See show ip flow.
Total Packets
Flows /Flow
---------- ---------
0.000 118.000
0.008 935.000
Copyright © 2010, Juniper Networks, Inc.
Bytes Packets
/Pkt /Sec
--------- ---------
1014.000 0.000
1026.000 7.664