Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP SERVICES CONFIGURATION GUIDE 2010-10-01 Configuration Manual page 259

show ipsec ike-configuration
show ike configuration
Copyright © 2010, Juniper Networks, Inc.
NOTE: The show ike identity command has been replaced by the show ipsec
identity command and may be removed completely in a future release.
Use to display the IKE identity configuration.
Field descriptions
Domain Name—Domain name the router uses in IKE authentication messages and
to generate certificate requests
Common Name—Common name used to generate certificates
Organization—Name of the organization used in the Subject Name field of certificates
Country—Country used to generate certificates
Example
host1#show ipsec identity
Ike identity:
Domain Name :myerx.kanata.junipernetworks.com
Common Name :jim
Organization:junipernetworks
Country
See show ipsec identity.
See show ike identity.
NOTE: The show ike configuration command has been replaced by the show
ipsec ike-configuration command and may be removed completely in a future
release.
Use to display a summary of the IKE configuration.
Field descriptions
Ike identity—Information from your IKE identify configuration that the router uses to
generate certificate requests
CRL Check—Setting of the CRL check: optional, required, ignored
Example
host1#show ipsec ike-configuration
Ike configuration:
Ike identity:
Domain Name :treverxsys2.juniper.net
Chapter 8: Configuring Digital Certificates
:ca
233