Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP SERVICES CONFIGURATION GUIDE 2010-10-01 Configuration Manual page 77

show ip prefix-tree
show ip protocols
Copyright © 2010, Juniper Networks, Inc.
seq 10 permit 192.178.0.0/16 le 24
seq 15 deny 195.178.0.0/16 le 24
seq 20 deny 195.178.0.0/16 le 32
ip prefix-list name def: 1 entries
seq 5 deny 192.170.0.0/16
Example 2
host1#show ip prefix-list summary
Total memory used for prefix-list: 310 bytes
Prefix-list with the last deletion/insertion: def
ip prefix-list name abc:
count: 4, range entries: 4, sequences: 5-20
ip prefix-list name def:
count: 1, range entries: 0, sequences: 5-5
See show ip prefix-list.
Use to display information about the prefix trees currently configured on the router.
Use the summary keyword to display abbreviated information about prefix trees.
Example 1
host1#show ip prefix-tree
Prefix-tree with the last deletion/insertion: t_abc5
ip prefix-tree name t_abc1: 1 entries
permit 108.243.0.0/16
ip prefix-tree name t_abc2: 3 entries
permit 101.10.254.0/24
permit 102.10.248.0/21
permit 103.10.192.0/18
permit 108.109.0.0/16
permit 108.109.241.0/24
ip prefix-tree name t_abc3: 1 entries
deny 108.0.0.0/8
Example 2
host1#show ip prefix-tree summary
Total memory used for prefix-tree: 860 bytes
Prefix-tree with the last deletion/insertion: t_abc5
ip prefix-tree name t_abc1:
count: 1
ip prefix-tree name t_abc2:
count: 5
ip prefix-tree name t_abc3:
count: 1
See show ip prefix-tree.
Use to display detailed information about the protocols currently configured on the
router.
Use the summary keyword to display only a list of the configured protocols.
Chapter 1: Configuring Routing Policy
51