Displaying Translation Entries - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP SERVICES CONFIGURATION GUIDE 2010-10-01 Configuration Manual

Displaying Translation Entries

show ip nat translations
Copyright © 2010, Juniper Networks, Inc.
forwarded through translator
See show ip nat statistics.
The show ip nat translations command displays current translations that reside in the
translation table.
Simple translation entries appear with inside/outside and local/global address
information. Extended entries appear with added protocol and port numbers (or query
IDs).
Using verbose mode additionally provides the time since creation and time since last use
for each translation entry.
Use to display current translations that reside in the NAT translation table.
Field descriptions
Prot—Protocol (TCP, UDP, ICMP, or GRE) for this translation entry; this field appears
only for extended table entries
Inside local—Inside local IP address for this translation entry; this field also provides
the port number, separated by a colon ( : ) for extended entries
Inside global—Inside global IP address for this translation entry; this field also provides
the port number, separated by a colon ( : ) for extended entries
Outside global—Outside global IP address for this translation entry; this field also
provides the port number, separated by a colon ( : ) for extended entries
Outside local—Outside local IP address for this translation entry; this field also
provides the port number, separated by a colon ( : ) for extended entries
Time since creation—Amount of time elapsed since the translation entry appeared
in the translation table
Time since last use—Amount of time elapsed since the translation entry was used
Example 1
host1# show ip nat translations
Prot Inside local
---- -------------
GRE 13.1.2.1:*
ICMP 13.1.2.2:4
TCP 13.1.2.3:20
47454704
Inside global Outside global
-------------- --------------
20.0.0.1:* ---
20.0.0.2:4 ---
20.0.0.3:50 ---
Chapter 2: Configuring NAT
Outside local
---------------
---
---
---
87