Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP SERVICES CONFIGURATION GUIDE 2010-10-01 Configuration Manual page 75

show ip as-path-access-list
show ip community-list
Copyright © 2010, Juniper Networks, Inc.
deny ip any any
IP Access List 2:
permit ip 172.19.0.0 0.0.255.255 any
deny ip 0.0.0.0 255.255.255.255 any
IP Access List 10:
permit ip any any
IP Access List 11:
deny ip any any
Example 2
host1#show access-list detail
IP Access List 1:
1: permit ip host 172.31.192.217 any
2: permit ip 12.40.0.0 0.0.0.3 any
deny ip any any
See show access-list.
See show ipv6 access-list.
Use to display information about AS-path access lists.
Example
host1#show ip as-path-access-list
AS Path Access List 1:
permit .*
AS Path Access List 2:
deny .*
AS Path Access List 3:
permit _109_
deny .*
AS Path Access List 4:
permit _109$
deny .*
AS Path Access List 10:
deny _109$
permit ^108_
deny .*
See show ip as-path-access-list.
Use to display community list information.
Display varies based on whether you issued the ip bgp community new-format
command.
Example 1—If you did not issue the ip bgp community new-format command, the
display appears as follows:
host1#show ip community-list
Community List 1:
permit 81200109
permit 81200110
permit 81200108
Community List 2:
Chapter 1: Configuring Routing Policy
49