Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP SERVICES CONFIGURATION GUIDE 2010-10-01 Configuration Manual page 229

show l2c statistics
Copyright © 2010, Juniper Networks, Inc.
Example 3
host1(config)#show l2c neighbor summary
L2C:
Number of configured Neighbors: 1
Number of Neighbors in GSMP_ESTAB state: 1
Number of neighbors in GSMP_EMPTY state: 0
See show l2c neighbor.
Use to display information about the ANCP statistics.
Field descriptions
Current session timeout—Configured session timeout (in seconds)
Discovery—State of topology discovery (Enabled or Disabled)
Number of configured routers—Number of ANCP configured routers
Number of neighbors—Number of ANCP neighbors
Number of active neighbors—Number of active ANCP neighbors
Number of end-user-ids—Number of ANCP end user IDs (output labels)
Number of peer-attachment-ids—Number of ANCP peer attachment IDs (input
labels)
Number of add-branches—Number of ANCP branches added
Number of delete-branches—Number of ANCP branches deleted
Example
host1#show l2c statistics
L2C:
Current session timeout: 25 seconds
Discovery: Enabled
Number of configured routers: 1
Number of neigbhors: 5
Number of active neighbors: 1
Number of end-user-ids: 25
Number of peer-attachment-ids: 39
Number of add-branches: 0
Number of delete-branches: 0
See show l2c statistics.
Chapter 7: Configuring ANCP
203