Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP SERVICES CONFIGURATION GUIDE 2010-10-01 Configuration Manual page 260

Software for e series broadband services routers ip services configuration guide
Table of Contents

Advertisement

JunosE 11.3.x IP Services Configuration Guide
show ipsec key mypubkey rsa
show ipsec key pubkey-chain rsa
234
Common Name :Sys2 ERX
Organization:Juniper Networks
Country
CRL Check:optional
See show ipsec ike-configuration.
See show ike configuration.
Use to display the 1024-bit or 2048-bit RSA public key configured on the router.
The public key is generated as part of a public/private key pair used to perform RSA
authentication during ISAKMP/IKE SA negotiations.
For information about the format of an RSA public key, see "Public Key Format" on
page 212 .
Example
host1#show ipsec key mypubkey rsa
30819f30 0d06092a 864886f7 0d010101 05000381 8d003081 89028181 009cfbde
a16cf72c 49fbd3c1 10d5d9d4 8ba15ec0 9adcb19e 18d488f8 e0370c51 2d10e751
ddd81be4 dfc78aad 9deb797f b2c51172 18967cfb e18f6efa 69285fef 10337527
78ca6bbc 907abb9e 44b12713 ab70cb0e a86d9c6c 80c99bd1 e2bf6b70 91222295
616a88bb cc479e15 be04f3a5 a6160645 844598c3 314b66af 3a8b7602 ed020301
0001
See show ipsec key mypubkey rsa.
Use to display a 1024-bit or 2048-bit ISAKMP/IKE public key that a remote peer uses
for RSA authentication.
To display a brief summary of the remote peers for which public keys are configured
on the router, use the summary keyword.
To display the public key for a remote peer with a specific IP address, use the address
keyword followed by the IP address, in 32-bit dotted decimal format.
To display the public key for a remote peer with a specific identity, use the name
keyword followed by either:
The fully qualified domain name (FQDN)
The FQDN preceded by an optional user@ specification; this is also referred to as
user FQDN format
The FQDN and user FQDN identifiers are case-sensitive and must exactly match the
identifier specified in the ipsec key pubkey-chain rsa command. For example, a public
key for user FQDN mjones@sales.company_abc.com does not match a public key for
FQDN sales.company_abc.com.
For information about the format of an RSA public key, see "Public Key Format" on
page 212 .
Field descriptions
:CA
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.3

Table of Contents