Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP SERVICES CONFIGURATION GUIDE 2010-10-01 Configuration Manual page 38

JunosE 11.3.x IP Services Configuration Guide
match level
match metric
match metric-type
match policy-list
12
Use to match any routes that are advertised from addresses contained in the specified
prefix list.
Example
host1(config-route-map)#match ipv6 route-source prefix-list source
Use the no version to delete all route-source match clauses from a route map unless
you specify a prefix list, in which case only that prefix list match is removed from the
route map.
See match ipv6 route-source.
Use to match routes for the specified level.
Example
host1(config-route-map)#match level level-1
Use the no version to delete the match clause from a route map or a specified value
from the match clause.
See match level.
Use to match a route for the specified metric value.
Example
host1(config-route-map)#match metric 10
Use the no version to delete the match clause from a route map or a specified value
from the match clause.
See match metric.
Use to match a route for the specified metric type.
Example
host1(config-route-map)#match metric-type external
Use the no version to delete the match clause from a route map.
See match metric-type.
Use to reference a policy list that has the specified name.
Example
host1(config-route-map)#match policy-list list1
Use the no version to remove the match clause from a route map.
See match policy-list.
Copyright © 2010, Juniper Networks, Inc.