Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP SERVICES CONFIGURATION GUIDE 2010-10-01 Configuration Manual page 142

JunosE 11.3.x IP Services Configuration Guide
116
Session up time—Amount of time the session has been operational since the last
session down event in days:hours:minutes:seconds format.
Up/Down count—Number of times up/down transitions have occurred on the session
Adaptivity—Number of times this session has adapted its intervals, or that additional
adaptivity is disabled for this BFD session on the router
Local
min tx interval—Minimum transmit interval (in seconds) configured on the session
at the local end
min rx interval—Minimum receive interval (in seconds) configured on the session
at the local end
multiplier—Multiplier configured on the session at the local end
(Adapted)
min tx interval—Minimum transmit interval (in seconds) to which the session is
adapted at the local end
min rx interval—Minimum receive interval (in seconds) to which the session is
adapted at the local end
multiplier—Multiplier to which the session is adapted at the local end
Remote
min tx interval—Minimum transmit interval (in seconds) configured on the session
at the remote end
min rx interval—Minimum receive interval (in seconds) configured on the session
at the remote end
multiplier—Multiplier configured on the session at the remote end
Up/Down count—Number of up/down transitions that have occurred on the session
Local diagnostic—Reason at the local end for the last session down event
Remote diagnostic—Reason at the remote end for the last session down event
Remote heard/Remote not heard—Whether the local end is receiving packets from
the remote end
hears us/doesn't hear us—Whether the remote end is receiving packets from the
local end
Min async interval—Minimum interval (in seconds) between packets sent when in
asynchronous mode
min slow interval—Minimum interval (in seconds) between packets when the remote
end is first being detected
Copyright © 2010, Juniper Networks, Inc.