Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP SERVICES CONFIGURATION GUIDE 2010-10-01 Configuration Manual page 227

host1# show l2c label brief
Interface
-------------------------
ATM4/0.300
ATM4/0.301
ATM4/0.302
ATM4/0.303
ATM4/0.304
Interface
-------------------------
ATM4/0.11
ATM4/0.12
ATM4/0.13
ATM4/0.14
show l2c neighbor
Copyright © 2010, Juniper Networks, Inc.
End-User-Id: Accessnode_10 atm2/3:0.0
Neighbor: accessnode_1002
Max-Branches: 5
Interface: ATM2/0.302
End-User-Id: Accessnode_10 atm2/4:0.0
Neighbor: accessnode _1002
Max-Branches: 5
Interface: ATM2/0.303
End-User-Id: Accessnode_10 atm2/5:0.0
Neighbor: accessnode _1004
Max-Branches: 5
Interface: ATM2/0.304
End-User-Id: Accessnode_10 atm2/6:0.0
Neighbor: accessnode _1004
Max-Branches: 5
Example 2
End-User-Id
-------------------------
Accessnode_10 atm2/2:0.0
Accessnode_10 atm2/3:0.0
Accessnode_10 atm2/4:0.0
Accessnode_10 atm2/5:0.0
Accessnode_10 atm2/6:0.0
Peer-Attach-Id
-------------------------
Accessnode_10 atm3/2:0.10
Accessnode_10 atm3/3:0.10
Accessnode_10 atm3/4:0.10
Accessnode_10 atm3/5:0.10
Example 3
host1# show l2c label neighbor-input brief
Interface
-------------------------
ATM4/0.11
ATM4/0.12
ATM4/0.13
ATM4/0.14
See show l2c label.
Use to display information about all known ANCP neighbors or specified ANCP neighbors
on the router along with their configurations.
Use the brief keyword to display limited information.
Use the summary keyword to display the number of active neighbors.
Field descriptions
Neighbor Name—Name associated with the neighbor
Neighbor Id—ID associated with the neighbor
Maximum Branches—Maximum number of branches this neighbor can have
Chapter 7: Configuring ANCP
Neighbor
----------------
accessnode_1002
accessnode_1002
accessnode_1002
accessnode_1004
accessnode_1004
Peer-Attach-Id
-------------------------
Accessnode_10 atm3/2:0.10
Accessnode_10 atm3/3:0.10
Accessnode_10 atm3/4:0.10
Accessnode_10 atm3/5:0.10
201