Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP SERVICES CONFIGURATION GUIDE 2010-10-01 Configuration Manual page 300

JunosE 11.3.x IP Services Configuration Guide
274
Total Reassembly Errors:
Fragmentation Errors:
Too Many Fragments:
Out of Resources:
Packet Too Big:
Reassembly Timeout:
Reassembly Disabled Discards:
Example 3—Shows reassembly statistics for virtual router vr2 before and after setting
a statistics baseline
The following command shows reassembly statistics for vr2 before setting the baseline.
host1:vr2#show ip tunnel reassembly statistics
Tunnel IP Reassembly Statistics for Virtual Router: vr2
Tunnel IP Reassembly enabled
Total Fragments Received:
Total Packets Reassembled:
Reassembly Errors:
Reassembly Discards:
The following command sets a baseline for reassembly statistics on vr2.
host1:vr2#baseline ip tunnel-reassembly
The following command shows reassembly statistics relative to the baseline before
new packets arrive at the router for reassembly.
host1:vr2#show ip tunnel reassembly statistics delta
Tunnel IP Reassembly Statistics for Virtual Router: vr2
Tunnel IP Reassembly enabled
Total Fragments Received:
Total Packets Reassembled:
Reassembly Errors:
Reassembly Discards:
The following command shows reassembly statistics relative to the baseline as new
packets start arriving at the router for reassembly.
host1:vr2#show ip tunnel reassembly statistics delta
Tunnel IP Reassembly Statistics for Virtual Router: vr2
Tunnel IP Reassembly enabled
Total Fragments Received:
Total Packets Reassembled:
Reassembly Errors:
Reassembly Discards:
See show ip tunnel reassembly statistics.
0
0
0
0
0
0
0
45
15
0
0
0
0
0
0
15
5
0
0
Copyright © 2010, Juniper Networks, Inc.