Monitoring The Mobile Ip Home Agent - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP SERVICES CONFIGURATION GUIDE 2010-10-01 Configuration Manual

Monitoring the Mobile IP Home Agent

baseline ip mobile home-agent
clear ip mobile binding
show ip mobile binding
Copyright © 2010, Juniper Networks, Inc.
Use to configure the license key to enable a home agent.
Specify a name for the license key; up to a maximum of 16 alphanumeric characters.
Example
host1(config)#license mobile-ip home-agent demo
Use the no version to delete the license key configuration.
See license mobile-ip home-agent.
Use the commands described in this section to set a statistics baseline, remove the
binding table, and verify the configuration of the Mobile IP home agent on a virtual router.
Use to set a statistics baseline for a specified Mobile IP home agent.
Example
host1#baseline ip mobile home-agent
There is no no version.
See baseline ip mobile home-agent.
Use to remove the binding table in the specified virtual router or a specified binding by
the mobile node home address or NAI.
Example
host1#clear ip mobile binding nai john@yahoo.com
There is no no version.
See clear ip mobile binding.
Use to display the binding table information of the home agent in the virtual router.
Field descriptions
MN-NAI—Network access identifier of the mobile node in user@realm, @realm, or
@ format
AAA-NAI—Network access identifier returned from the AAA server in user@realm,
@realm, or @ format
Home IP address—IP address of the mobile node
Home agent address—IP address of the home agent
Care-of-address—IP address of the foreign agent care-of address or co-located
care-of address
Chapter 13: Configuring the Mobile IP Home Agent
313