Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP SERVICES CONFIGURATION GUIDE 2010-10-01 Configuration Manual page 131

Software for e series broadband services routers ip services configuration guide
Table of Contents

Advertisement

448
0.000
480
0.000
512
0.000
544
0.000
576
0.000
1024
96.784
1536
3.216
2048
0.000
2560
0.000
3072
0.000
3584
0.000
4096
0.000
4608
0.000
Total
Protocol Port
Flows
-------------------
----------
TCP-telnet
------------------ Summary ---------------------
Total Flows Processed: 216
Total Packets 34401
Total Bytes
34882614
------------------------------------------------
show ip cache flow aggregation
Copyright © 2010, Juniper Networks, Inc.
Flows
Packets
/Sec
/Flow
---------
------------
216
1.450
159.264
See show ip cache flow.
Use to display IP flow cache operational statistics for an aggregation cache.
Field descriptions
Aggregation Cache
AS—AS aggregation cache
Destination-prefix—Destination-prefix aggregation cache
Prefix—Prefix aggregation cache
Protocol-port—Protocol-port aggregation cache
Source-prefix—Source-prefix aggregation cache
Total Flows—Total number of flows
Flows/Sec—Number of flows per second
Packets/Flow—Number of packets per flow
Bytes/Packet—Number of bytes per packet
Packets/Sec—Number of packets per second
Src. Addr—Source address of sampled packets
Src. Intf—Source interface of sampled packets
Dst. Addr—Destination address of sampled packets
Chapter 3: Configuring J-Flow Statistics
Bytes
Packets
/Pkt
/Sec
---------
-----------
1014.000
230.879
105

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.3

Table of Contents