Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP SERVICES CONFIGURATION GUIDE 2010-10-01 Configuration Manual page 324

JunosE 11.3.x IP Services Configuration Guide
298
InPolicyErrors—Number of policy errors in received traffic
InOtherRxErrors—Number of packets received that have errors other than those
listed above
InDecryptErrors—Number of decryption errors in received traffic
InPadErrors—Number of packets received that had invalid values after the packet
was decrypted
OutUserPackets—Number of user packets sent
OutUserOctets—Number of octets sent in user packets
OutAccPackets—Number of encapsulated packets sent
OutAccOctets—Number of octets sent in encapsulated packets
OutPolicyErrors—Number of packets arriving at the transport connection for
encapsulation that do not meet the specified identifier (selector)
OutOtherTxErrors—Number of outbound packets that have errors other than those
listed above
Example 1
host1:vr11#show ipsec transport interface
IPSEC transport interface 5 is Up
IPSEC transport interface 6 is Up
2 Ipsec transport interfaces found
Example 2
host1:vr11#show ipsec transport interface 5
IPSEC transport interface 5 is Up
Example 3
host1:vr11#show ipsec transport interface detail 5
IPSEC transport interface 5 is Up
Configuration
Virtual router vr00
Application gre
No pfs group
Mtu is 1440
Local address is 10.255.0.61
Remote address is 10.255.0.62
Local identity is subnet 10.255.0.61 255.255.255.255, proto 47, port
0
Remote identity is subnet 10.255.0.62 255.255.255.255, proto 47, port
0
Inbound spi 0x15c30204
Inbound transform transport-esp-3des-sha1
Inbound lifetime 900 seconds 102400 kilobytes
Outbound spi is 0x16a10205
Outbound transform transport-esp-3des-sha1
Outbound lifetime 900 seconds 102400 kilobytes
Copyright © 2010, Juniper Networks, Inc.