Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP SERVICES CONFIGURATION GUIDE 2010-10-01 Configuration Manual page 83

Copyright © 2010, Juniper Networks, Inc.
routes in table—Number of routes in the routing table
timestamp req—Number of requests for a timestamp
timestamp rpy—Number of replies to timestamp requests
addr mask req—Number of address mask requests
addr mask rpy—Number of address mask replies
ICMP Statistics Rcvd:
total—Total number of ICMP packets received
errors—Number of error packets received
dst unreach—Number of packets received with destination unreachable
time exceed—Number of packets received with time-to-live exceeded
param probs—Number of packets received with parameter errors
src quench—Number of source quench packets received
redirects—Number of receive packet redirects received
echo req—Number of echo request (ping) packets received
echo rpy—Number of echo replies received
timestamp req—Number of requests for a timestamp received
timestamp rpy—Number of replies of timestamp requests received
addr mask req—Number of mask requests received
addr mask rpy—Number of mask replies received
ICMP Statistics Sent:
total—Total number of ICMP packets sent
errors—Number of error packets sent
dest unreach—Number of packets sent with destination unreachable
time excd—Number of packets sent with time-to-live exceeded
param prob—Number of packets sent with parameter errors
src quench—Number of source quench packets sent
redirects—Number of send packet redirects sent
echo req—Number of echo request (ping) packets sent
echo rpy—Number of echo replies sent
Chapter 1: Configuring Routing Policy
57