Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP SERVICES CONFIGURATION GUIDE 2010-10-01 Configuration Manual page 338

Software for e series broadband services routers ip services configuration guide
Table of Contents

Advertisement

JunosE 11.3.x IP Services Configuration Guide
license mobile-ip home-agent
312
NOTE: If you delete a mobile node host by using the no ip mobile host
command, all security associations that you configured for this host are
deleted.
To specify the mobile node, include the required nai keyword or the required address
keyword, as follows:
To specify the network access identifier (NAI) for the mobile node, include the nai
keyword. You must choose one of the following formats, where user represents the
user name and realm represents the domain name: user@realm, @realm, or @.
To specify a nonzero home address of the mobile node, include the address keyword
followed by the IP address of the mobile node.
To specify the security parameter index (SPI) value to authenticate inbound requests
and permit authentication for outbound registration requests, include the required spi
keyword followed by a 4-octet hexadecimal number, in the range 0x100–0xFFFFFFFF.
To specify the authentication key for this security association, include the required key
keyword followed by either the hex keyword or the ascii keyword, as follows:
To specify a hexadecimal key, use the hex keyword followed by a 32-character
(128-bit) hexadecimal value in the range 0x0–0xFFFFFFFE.
To specify an ASCII key, use the ascii keyword followed by an alphanumeric value
up to a maximum of 16 characters (128 bits).
To specify the number of seconds by which a registration request can exceed the time
value configured on the home agent, include the optional replay timestamp within
keywords followed by the number of seconds, in the range 1–255; the default value is
7 seconds.
To specify the type of authentication algorithm for Mobile IP messages, include the
optional algorithm keyword followed by either the hmac-md5 keyword or the
keyed-md5 keyword.
Examples
host1(config)#ip mobile secure host 200.1.1.1 spi 0x398 key ascii w4ex algorithm
keyed-md5 replay timestamp within 225
or
host1(config)#ip mobile secure host nai @amazon.net spi 0x100 key ascii pD4En
algorithm keyed-md5 replay timestamp within 100
Use the no version to delete the security associations for the specified host on the
virtual router.
See ip mobile secure host.
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.3

Table of Contents