Errata - Juniper JUNOS OS 10.4 - RELEASE NOTES REV 6 Release Note

Errata and Changes in Documentation for Junos OS Release 10.4 for M Series, MX Series, and T Series Routers
Copyright © 2011, Juniper Networks, Inc.
Subscriber Access Configuration Guide or the documentation for subscriber access
management.
In Junos OS Release 10.3R1 and later, PDF files are not available for individual HTML
pages in the Junos OS documentation set. PDF files are available for the complete
Junos OS Release 10.3 configuration guides at
http://www.juniper.net/techpubs/software/junos/junos103/index.html
complete hardware guides are accessible at the following URLs:
For M Series routers:
http://www.juniper.net/techpubs/en_US/release-independent/junos/informa
tion-products/pathway-pages/m-series/
For MX Series routers:
http://www.juniper.net/techpubs/en_US/release-independent/junos/informa
tion-products/pathway-pages/mx-series/
For T Series and TX Matrix routers:
http://www.juniper.net/techpubs/en_US/release-independent/junos/informa
tion-products/pathway-pages/t-series/
In addition, individual HTML pages have a
area on the page.

Errata

This section lists outstanding issues with the documentation.
High Availability
TX Matrix Plus routers and T1600 routers that are configured as part of a routing matrix
do not currently support nonstop active routing. [High Availability]
Interfaces and Chassis
For the T320, T640, and T1600 routers, external clock synchronization is not supported
on sonic clock generators (SCG) with DB-9 external clock interfaces.
[System Basics, Hardware Guides]
The Configuring Layer 2 Circuit Transport Mode chapter in the Network Interfaces
Configuration Guide states the following:
For Layer 2 circuit cell relay and Layer 2 trunk modes, include the
statement at the
cell [edit chassis fpc slot pic slot]
encapsulation atm-ccc-cell-relay
hierarchy level.
This configuration is correct and interoperates with routers running all versions of Junos
OS.
However, the chapter does not mention that you can also include the encapsulation
atm-ccc-cell-relay statement at the
hierarchy level. when you include the statement at the
logical-unit-number]
interfaces interface-name unit logical-unit-number]
points in mind:
link in the upper left corner of the text
Print
hierarchy level and the
statement at the
[edit interfaces interface-name]
[edit interfaces interface-name unit
] hierarchy level, keep the following
. PDF files for the
atm-l2circuit-mode
[edit
79