Table of Contents
Advertisement
Errata and Changes in Documentation for Junos OS Release 10.4 for SRX Series Services Gateways and J Series Services Routers
Table 16: Standard Bandwidths of DSL Operating Modes
Operating Modes
ADSL2+
ADSL2+ Annex M
Copyright © 2011, Juniper Networks, Inc.
The ADSL2+ and ADSL2+ Annex M upstream values given in the Junos OS Interfaces
Configuration Guide for Security Devices are displayed incorrectly. The correct values
are as follows:
Junos OS Integrated Convergence Services Configuration and Administration Guide
The Junos OS Integrated Convergence Services Configuration and Administration Guide
does not include
commands for Junos OS Release 10.4.
show
J-Web
J-Web security package update Help page—The J-Web Security Package Update
Help page does not contain information about download status.
J-Web pages for stateless firewall filters—There is no documentation describing the
J-Web pages for stateless firewall filters. To find these pages in J-Web, go to
Configure>Security>Firewall Filters, then select IPv4 Firewall Filters or IPv6 Firewall
Filters. After configuring filters, select Assign to Interfaces to assign your configured
filters to interfaces.
There is no documentation describing the J-Web pages for media gateways. To find
these pages in J-Web, go to Monitor>Media Gateway.
J-Web Configuration Instructions
some of the J-Web configuration example instructions in the Junos administration and
configuration guides became obsolete and thus were removed. For examples that are
missing J-Web instructions, use the provided CLI instructions.
Junos OS Security Configuration Guide
The Junos OS Security Configuration Guide contains outdated information about NSM
support for IPv6. Please consult the NSM release notes for version compatibility,
required schema updates, and up-to-date support information.
ALG configuration examples in the Junos OS Security Configuration Guide incorrectly
show policy-based NAT configurations. NAT configurations are now rule-based.
The Junos OS Security Configuration Guide does not state that custom attacks and
custom attack groups in IDP policies can now be configured and installed even when
a valid license and signature database are not installed on the device.
The "Verifying the Policy Compilation and Load Status" section of the Junos OS Security
Configuration Guide has a missing empty/new line before the
in the second sample output.
Upstream Values
1—1.5 Mbps
2.5—3 Mbps
— Because of ongoing J-Web interface enhancements,
heading,
IDPD Trace file
183
Advertisement
Table of Contents
