Table of Contents
Advertisement
Copyright © 2011, Juniper Networks, Inc.
Issues in Junos OS Release 10.4 for M Series, MX Series, and T Series Routers
A commit script that activates an apply group might fail to pass the commit check
logic. [PR/576384]
The
show system rollback
the command works from the operational mode. [PR/580645]
Resolved Issues in Junos OS Release 10.4 for M Series, MX Series, and T Series Routers
Class of Service
On T Series routers, when the class of service scheduling or queueing parameters on
an interface with a high traffic utilization (close to the line rate or oversubscribed) is
changed, the FPC which hosts the interface might restart. This issue is specific to
non-ES type FPCs. [PR/565307: This issue has been resolved.]
When a firewall filter containing the packet loss priority (PLP) rewrite references a
policer that also contains the PLP rewrite, a two time PLP rewrite occurs with the PLP
bits of the packets matching the filter condition set on the PLP set action in the policer,
and later the PLP set action is set on the firewall filter. [PR/566896: This issue has
been resolved.]
Forwarding and Sampling
When a Routing Engine sampling is configured, and each flow server corresponds to
a different autonomous system type, the packet size of the exported cflowd v5/8/500
packets might increase. [PR/530008: This issue has been resolved.]
On a sampled traffic on a multi services PIC, the multicast convergence slows down
with the message "RPD_KRT_Q_RETRIES: Indirect Next Hop Update: No buffer space
available." [PR/554363: This issue has been resolved.]
Making any circuit cross-connect (CCC) filter changes might render the Packet
Forwarding Engine busy which might cause a slow statistics response. [PR/554722:
This issue has been resolved.]
When a loopback filter is configured, packets sent by the ASIC to the Packet Forwarding
Engine's CPU for generation of TTL expiry notification are dropped. [PR/555028: This
issue has been resolved.]
The mib2d process might crash when a race condition exists between the mib2d
process and the dfwd process. [PR/563419: This issue has been resolved.]
When a firewall filter with multiple terms references the same three color policer and
has the same count variable configured, any IP packets that match the second or later
terms might get corrupted. Use different count variables in each term to prevent this
issue. [PR/567546: This issue has been resolved.]
The Radius Accounting Interim message might not be sent immediately after a Change
of Authorization (CoA), even if the CoA is successfully processed and the
option is present in the configuration. [PR/570058: This issue
coa-immediate-update
has been resolved.]
command does not work in the configuration mode, while
61
Advertisement
Table of Contents
