Errata For The Junos Os Documentation - Juniper JUNOS OS 10.4 - RELEASE NOTES REV 6 Release Note

Errata and Changes in Documentation for Junos OS Release 10.4 for SRX Series Services Gateways and J Series Services Routers
Table 11: Chassis Cluster Support
Feature
Active/active chassis cluster (that is, cross-box data forwarding over the fabric interface)
Application Layer Gateways (ALGs)
Chassis cluster formation
Control plane failover
Dampening time between back-to-back redundancy group failovers
Data plane failover
Dual control links
Dual fabric links
Junos OS flow-based routing functionality
Low-impact cluster upgrade (ISSU light)
Multicast routing
Redundancy group 0 (backup for Routing Engine)
Redundancy groups 1 through 128
Redundant Ethernet interfaces
Redundant Ethernet interface link aggregation groups (LAGs)
Copyright © 2011, Juniper Networks, Inc.
If Commit Preference is
configuration and save it as a candidate configuration, then click Commit
Options Commit.
>
J-Web Online Help
Previously, J-Web online Help instructions were available both in the Help and in the
administration and configuration guides. These topics have been removed from the
guides and are now available only in the online Help.

Errata for the Junos OS Documentation

This section lists outstanding issues with the software documentation.
Feature Support Reference
For SRX200 devices, the following support information is missing from the Junos OS
Feature Support Reference for SRX Series and J Series Devices:
Validate configuration changes
, click OK to check your
SRX220 Support
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
No
179