Junos Os Xml Api And Scripting - Juniper JUNOS OS 10.4 - RELEASE NOTES REV 6 Release Note

Changes in Default Behavior and Syntax in Junos OS Release 10.4 for M Series, MX Series, and T Series Routers
Copyright © 2011, Juniper Networks, Inc.
Negotiate IP address option removed—The negotiate IP address option is no longer
allowed in the MLFR and MFR encapsulations.
Hardware restrictions in the output of the show interfaces extensive command
using the show interfaces extensive
"Filter statistics" section will not be displayed because the hardware does not include
those counters.
New command to clear Link Aggregation Control Protocol statistics—A new
command,
clear lacp statistics
(LACP) statistics. Use the
clear interface statistics for a specific interface only by using the
option.
interface-name
[Interfaces Command Reference]
Change to the
show interfaces aenumber extensive
interfaces aenumber extensive
Protocol (LACP) statistics. To display LACP statistics, use the
command.
interfaces
[Interfaces Command Reference]
Increase in unit numbering for demux0 and pp0 interfaces—The unit numbering for
demux0 and pp0 interfaces has been increased to 1,073,741,823.
Support for Diffie-Hellman 2048-bit encryption—You can now configure
Diffie-Hellman 2048-bit encryption (
Multiservices PICs.
To use Diffie-Hellman 2048-bit encryption, include the
the
[edit services ipsec-vpn ike proposal proposal-name]
To configure 2048-bit encryption for an IPsec policy, include the
at the
[edit services ipsec-vpn ipsec policy policy-name perfect-forward-secrecy
level.
[Services Interfaces]
Show chassis environment cb
command is now available for the MX80 routers.
environment cb

Junos OS XML API and Scripting

The
jcs:load-configuration
template, included in the import file
jcs:load-configuration
$commit-options parameter to customize the
be passed to the
jcs:load-configuration
The default value for
$commit-options
—Check the correctness of the candidate configuration syntax, but do not
check
commit the changes.
—Force the commit on the other Routing Engine (ignore any
force-synchronize
warnings).
command with a 100-Gigabit Ethernet PIC, the
, enables you to clear Link Aggregation Control Protocol
interfaces option to clear interface statistics. You can also
command—The output of the
command no longer displays Link Aggregation Control
) for IPsec communications on
group14
command on MX80 routers—The
template now accepts the
commit
template as a node-set.
is null. Supported options are:
—When
interfaces
show lacp statistics
dhgroup group14 statement at
hierarchy level.
keys group14 option
] hierarchy
show chassis
parameter—The
$commit-options
, now accepts the
junos.xsl
operation. The parameter must
show
45