Table of Contents
Advertisement
JUNOS OS 10.4 Release Notes
204
J-Web Interface
In the J-Web interface, you cannot commit some configuration changes in the Port
Configuration page and the VLAN Configuration page because of the following
limitations for port mirroring ports and port mirroring VLANs:
A port configured as the output port for an analyzer cannot be a member of any
VLAN other than the default VLAN.
A VLAN configured to receive analyzer output can be associated with only one port.
[PR/400814]
When you use the Microsoft Internet Explorer browser to open a report from the
following pages in the J-Web interface, the report opens in the same browser session:
Files page (Maintain > Files)
History page (Maintain > Config Management > History)
Port Troubleshooting page (Troubleshoot > Troubleshoot > Troubleshoot Port)
Static Routing page (Monitor > Routing > Route Information)
Support Information page (Maintain > Customer Support > Support Information)
View Events page (Monitor > Events and Alarms > View Events)
As a workaround, save the report and then open it.
[PR/433883]
In the J-Web interface, in the Port Security Configuration page, you are required to
configure
when you configure
action
is not mandatory in the CLI. [PR/434836]
In the J-Web interface, in the OSPF Global Settings table in the OSPF Configuration
page, the Global Information table in the BGP Configuration page, or the Add Interface
window in the LACP Configuration page, if you try to change the position of columns
using the drag-and-drop method, only the column header moves to the new position
instead of the entire column. [PR/465030]
If a large number of static routes are configured and if you have navigated to pages
other than page 1 in the Route Information table in the J-Web interface (Monitor >
Routing > Route Information), changing the
the page but does not return to page 1. For example, if you run a query from page 3 and
the new query returns very few results, the Results table continues to display page 3
and shows no results. To view the results, navigate to page 1 manually. [PR/476338]
In the J-Web interface, the dashboard does not display the uplink ports or uplink module
ports unless transceivers are plugged into the ports. [PR/477549]
The J-Web interface Static Routing page might not display details on entries registered
in the routing table. [PR/483885]
In the J-Web interface, the
a warning message when there are pending changes to be committed. [PR/514853]
even though configuring an
MAC limit
Route Table
Software Upload and Install Package
action
to query other routes refreshes
option might not display
Copyright © 2011, Juniper Networks, Inc.
value
Advertisement
Table of Contents
