Table of Contents
Advertisement
Copyright © 2011, Juniper Networks, Inc.
Issues in Junos OS Release 10.4 for M Series, MX Series, and T Series Routers
fpc0 LU 0 PPE_7 Errors ucode data error 0x00000184
fpc0 PPE Thread Timeout Trap:
entry_index_nh
Count 10831395, PC 2c, 0x002c:
Restart the Packet Forwarding Engine to clear this error state. [PR/564998]
The configuration of DSCP ReWrite rules on a 10-port 10-Gigabit Ethernet LAN/WAN
PIC with SFP+ might overwrite the DSCP value coming from the Routing Engine for a
host-generated traffic. [PR/575259]
When a core-facing DPC is restarted, the message "mcsn: cannot perform nh operation
ADDANDGET nhop (null) type indirect index 0 errno 22" appears. A trigger also moves
the interfaces from bridge domains to VPLS instances. To clear this issue, restart
multicast snooping. [PR/576058]
When local AS and auto-export are configured in a hub-spoke environment, hidden
routes might exist. [PR/578833]
Services Applications
The output of the
show services ids destination-table
flow and related statistics in the IDS anomaly table for a certain period of time after
the flows are activated. [PR/490584]
The data channel applications for protocols such as FTP, TFTP, RTSP, and SIP are not
in the same application group as their control channel applications. For example,
control channel application junos:ftp is in the group junos:file-server, but the
corresponding data application junos:system:ftp-data is not in any group. [PR/507865]
On M Series and MX Series routers, after a hot-standby RMS, all existing flows are
dropped and it takes some time for new flows to appear with the state. This is due to
the limitation of the RMS. All existing traffic is dropped, and RPC is most impacted as
it has a long retry timer and takes a long time to recover. [PR/535597]
When unit 0 of the Multiservices PIC interface is not specified, the
traffic
command does not display the input packet's number properly for that particular
ms-I/F interface. [PR/544318]
When an Snmpwalk operation is performed on the
of its subobjects, the "SPD_DB_SVC_SET_ADD_FAILURE" log message appears.
[PR/546808]
FTP sessions that last long periods (several minutes or hours) are suddenly
disconnected when traffic is still flowing on the data channel. [PR/579475]
User Interface and Configuration
In the J-Web interface , the "Generate Report" option under Monitor Event and Alarms
opens the report in the same web page. [PR/433883]
Selecting the monitor port for any port in the Chassis Viewer page displays the common
Port Monitoring page instead of the corresponding Monitoring page of the selected
port. [PR/446890]
Count 3, PC 20, 0x0020:
0x0020:
entry_index_nh PPE PPE HW Fault Trap:
entry_policer_nh
jnxSpSvcSetSvcType
command might not display any
monitor interface
object or any
59
Advertisement
Table of Contents
