Juniper JUNOS OS 10.4 - RELEASE NOTES REV 6 Release Note page 37

Copyright © 2011, Juniper Networks, Inc.
New Features in Junos OS Release 10.4 for M Series, MX Series, and T Series Routers
(Optional) Include the
encapsulation
profile-name interface "$junos-interface-ifd-name" unit $junos-interface-unit]
level and specify the unit encapsulation as
NOTE: If you choose not to specify an encapsulation for the logical
interface, you must specify encapsulation for the physical interface.
Include the statement and define the outer VLAN tag using the
vlan-tags
$junos-stacked-vlan-id dynamic variable and the inner VLAN tag using the
dynamic variable at the
$junos-vlan-id
"$junos-interface-ifd-name" unit $junos-interface-unit]
Include the input-vlan-map
interface "$junos-interface-ifd-name" unit $junos-interface-unit]
define the map settings as follows:
NOTE: You configure the
a need to either push an outer tag on a single-tagged subscriber packet
or modify the outer tag in a subscriber dual-tagged packet.
Specify the action that you want the input VLAN map to take. See the Network
Interfaces Configuration Guide for details on how to configure
statement options.
Include the vlan-id statement along with the
Include the
output-vlan-map
interface "$junos-interface-ifd-name" unit $junos-interface-unit]
specify the action that you want the output VLAN map to take. See the Network
Interfaces Configuration Guide for details on how to configure
statement options.
NOTE: You configure the
is a need to either pop or modify the outer tag found in a dual-tagged
packet meant for the subscriber.
Specify the unit family as
vpls
"$junos-interface-ifd-name" unit $junos-interface-unit family]
Include the
flexible-vlan-tagging
[edit interfaces interface-name]
statement at the
vlan-vpls or
[edit dynamic-profiles profile-name interface
statement at the [edit dynamic-profiles profile-name
statement only when there is
input-vlan-map
$junos-vlan-map-id
statement at the
[edit dynamic-profiles profile-name
output-vlan-map
at the
[edit dynamic-profiles profile-name interface
statement for any interfaces you plan to use at the
hierarchy level.
[edit dynamic-profiles
hierarchy
vlan-ccc .
hierarchy level.
hierarchy level and
input-vlan-map
dynamic variable.
hierarchy level and
output-vlan-map
statement only when there
hierarchy level.
37