Table of Contents
Advertisement
JUNOS OS 10.4 Release Notes
Attribute Number
26-59
Related
Documentation
82
dynamic VLANs on the Trio MPC/MIC family of products. In the current release, dynamic
CoS is supported only on static VLANs on Trio MPC/MIC interfaces.
[Subscriber Access]
The Subscriber Access Configuration Guide incorrectly describes the
statement as it is used for subscriber access management. When configuring the
statement for subscriber access management, you must always
authentication-order
specify the
method. Subscriber access management does not support the
radius
password
keyword (the default), and authentication fails when you do not specify an
authentication method.
[Subscriber Access]
In the Subscriber Access Configuration Guide, the Juniper Networks VSAs Supported by
the AAA Service Framework topic and the Specifying an Address Pool in a Domain Map
topic incorrectly indicate that VSA 26-2 (Local-Address-Pool) is supported. Subscriber
management does not support this VSA.
[Subscriber Access]
In the Subscriber Access Configuration Guide, the Juniper Networks VSAs Supported by
the AAA Service Framework table and the RADIUS-Based Mirroring Attributes table
incorrectly describe VSA 26-59. The correct description is as follows:
Attribute Name
Med-Dev-Handle
[Subscriber Access]
User Interface and Configuration
The
show system statistics bridge
routers. [System Basics Command Reference]
VPNs
In Chapter 19, Configuring VPLS of the VPNs Configuration Guide, an incorrect statement
that caused contradictory information about which platforms support LDP BGP
interworking has been removed. The M7i router was also omitted from the list of
supported platforms. The M7i router does support LDP BGP interworking.
[VPNs]
New Features in Junos OS Release 10.4 for M Series, MX Series, and T Series Routers
on page 6
Changes in Default Behavior and Syntax in Junos OS Release 10.4 for M Series, MX
Series, and T Series Routers on page 42
Issues in Junos OS Release 10.4 for M Series, MX Series, and T Series Routers on page 55
Upgrade and Downgrade Instructions for Junos OS Release 10.4 for M Series, MX Series,
and T Series Routers on page 83
Description
Identifier that associates mirrored traffic to a specific
subscriber.
command displays system statistics on MX Series
Copyright © 2011, Juniper Networks, Inc.
authentication-order
Advertisement
Table of Contents
