Hardware Features-Srx210, Srx220, And Srx240 Services - Juniper JUNOS OS 10.4 - RELEASE NOTES REV 6 Release Note

Copyright © 2011, Juniper Networks, Inc.
New Features in Junos OS Release 10.4 for SRX Series Services Gateways and J Series Services Routers
[Junos OS CLI Reference, Junos OS Security Configuration Guide]
Dynamic VPN access through the Junos Pulse client—This feature is supported on
SRX100, SRX210, SRX220, SRX240, and SRX650 devices.
Junos Pulse enables secure authenticated network connections to protected resources
and services over LANs and WANs. Junos Pulses is a remote access client developed
to replace the earlier access client called Juniper Networks Access Manager. You must
uninstall Access Manager before you install the Junos Pulse client.
Junos Pulse supports remote virtual private network tunnel connectivity to SRX Series
Services Gateways that are running Junos OS. To configure a firewall access
environment for Junos Pulse clients, you must configure the VPN settings on the SRX
Series device and create and deploy a firewall connection on the Junos Pulse client.
For SRX Series devices running Junos OS Releases 10.2 through 10.4, Junos Pulse is
supported but must be deployed separately. In Junos OS Release 11.1 and later releases,
if the Pulse client does not exist on the client machine, the Pulse client is automatically
downloaded and installed when you log in to an SRX Series device. If the Pulse client
exists on the client machine, you must launch the Pulse client.
[Junos OS Security Configuration Guide]
Hardware Features—SRX210, SRX220, and SRX240 Services Gateways
AX411 Access Point Support on SRX220 Services Gateways
SRX220 Services Gateways running Junos OS Release 10.4R1 or later releases support
the AX411 Access Point in the same manner as do the SRX210, SRX240, and SRX650
Services Gateways. Support for the SRX220 Services Gateway is not documented in the
AX411 Access Point Hardware Guide or in the WLAN Configuration and Administration
Guide, but wherever those guides indicate support for the SRX210 Services Gateway,
that support applies to the SRX220 Services Gateway as well.
1-Port Small Form-Factor Pluggable (SFP) Gigabit Ethernet Mini-Physical Interface
Module (Mini-PIM)
The 1-Port Small Form-Factor Pluggable (SFP) Gigabit Ethernet Mini-Physical Interface
Module (Mini-PIM) complements the on-board 10/100/1000 Mbps Ethernet interfaces
with extended LAN or WAN connectivity. It offers support for a variety of transceivers.
This Mini-PIM can be used in copper and optical environments to provide maximum
flexibility when upgrading from an existing infrastructure to Metro Ethernet. This Mini-PIM
is supported on the following devices:
SRX210 Services Gateway
SRX220 Services Gateway
SRX240 Services Gateway
The following key features are supported on the 1-Port SFP Gigabit Ethernet Mini-PIM:
Online insertion and removal of transceivers
Real-time visual status of connectivity and traffic flows
115