Table of Contents
Advertisement
Copyright © 2011, Juniper Networks, Inc.
set protocols l2iw
set protocols bgp family inet flow
set protocols bgp family inet-vpn flow
set protocols igmp-snooping vlan all proxy
Routing Hierarchy
On SRX100, SRX210, SRX220, SRX240, SRX650, and all J Series devices, the following
routing hierarchy CLI commands are not supported. However, if you enter these
commands in the CLI editor, they appear to succeed and do not display an error
message.
set routing-instances p1 services
set routing-instances p1 multicast-snooping-options
set routing-instances p1 protocols amt
set routing-options bmp
set routing-options flow
Services Hierarchy
On SRX100, SRX210, SRX220, SRX240, SRX650, and all J Series devices, the following
services hierarchy CLI commands are not supported. However, if you enter these
commands in the CLI editor, they appear to succeed and do not display an error
message.
set services service-interface-pools
SNMP Hierarchy
On SRX100, SRX210, SRX220, SRX240, SRX650, and all J Series devices, the following
SNMP hierarchy CLI commands are not supported. However, if you enter these
commands in the CLI editor, they appear to succeed and do not display an error
message.
set snmp community 90 logical-system
set snmp logical-system-trap-filter
set snmp trap-options logical-system
set snmp trap-group d1 logical-system
Unsupported CLI
145
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOS OS 10.4 - RELEASE NOTES REV 6 and is the answer not in the manual?
Questions and answers