Juniper JUNOS OS 10.4 - RELEASE NOTES REV 6 Release Note page 165

Copyright © 2011, Juniper Networks, Inc.
Issues in Junos OS Release 10.4 for SRX Series Services Gateways and J Series Services Routers
Infrastructure
On J Series devices, you cannot use a USB device that provides U3 features (such as
the U3 Titanium device from SanDisk Corporation) as the media device during system
boot. You must remove the U3 support before using the device as a boot medium. For
the U3 Titanium device, you can use the U3 Launchpad Removal Tool on a
Windows-based system to remove the U3 features. The tool is available for download
at
http://www.sandisk.com/Retail/Default.aspx?CatID=1415
use the U3 Launchpad Installer Tool accessible at
http://www.sandisk.com/Retail/Default.aspx?CatID=1411
On J Series devices, if the device does not have an ARP entry for an IP address, the
device drops the first packet from itself to that IP address. [PR/233867]
On J Series devices, when you press the F10 key to save and exit from BIOS configuration
mode, the operation might not work as expected. As a workaround, use the Save and
Exit option from the Exit menu. This issue can be seen on the J4350 and J6350 devices
with BIOS Version 080011 and on the J2320 and J2350 devices with BIOS Version
080012. [PR/237721]
On J Series devices, the
work as expected. This issue can be seen on the J4350 and J6350 routers with BIOS
Version 080011 and on the J2320 and J2350 routers with BIOS Version 080012. To
help mitigate this issue, note any changes you make to the BIOS configuration so that
you can revert to the default BIOS configuration as needed. [PR/237722]
On SRX3400, SRX3600, SRX5600, and SRX5800 devices, the SNMP set for the MIB
object usmUserPrivKeyChange
Installation
On SRX100, SRX210, SRX240, or SRX650 devices with 1-GB storage flash, when you
use the command to copy the Junos OS package from
file copy
directory, you might get a message saying that the file system is full. Do not use the
command to get the Junos OS package for software upgrade.
file copy
The file copy command copies the Junos OS package as a temporary file
and then copies the file with a package name in a local directory under the
partition. This means that a Junos OS package of size X needs 2X space in the
partition. For example, a Junos OS package of 197 MB will need 394 MB, whereas the
partition is less than 350 MB on a 1-GB storage flash. Thus, the
/cf/var
command will fail. [PR/526030]
Integrated Convergence Services
The following issues currently exist in SRX210 and SRX240 devices with Integrated
Convergence Services:
SNMP does not provide support for survivable call server (SRX Series SCS) statistics.
[PR/456454]
On SRX210 devices with voice capability, SIP trunking or FXS trunking calls do not work
if the called party supports only the G729AB/G711-Mu-law codec. [PR/504135]
Clear NVRAM option in the BIOS configuration mode does not
does not work. [PR/482475]
. (To restore the U3 features,
). [PR/102645]
to a local
ftp://<path>
in/cf/var/tmp
/cf/var
/cf/var
file copy
165