Table of Contents
Advertisement
Copyright © 2011, Juniper Networks, Inc.
On EX4500 switches, when you are configuring Gigabit Ethernet interfaces from the
command-line interface (CLI), automatic command completion does not work.
[PR/561695]
On EX4200 switches, autonegotiation bypass on an EX4200 switch, which allows a
link in Gigabit Ethernet SFPs to begin operation even if autonegotiation on the link
partner is disabled, fails to bring up the link. [PR/571198: This issue has been resolved.]
J-Web Interface
In the J-Web interface, the automatic command-completion feature might not be
disabled in the password field. As a workaround, you can disable the automatic
command-completion feature in the browser. [PR/508425: This issue has been
resolved.]
If you have a candidate configuration in the CLI and you try to commit configuration
changes using the Point and Click CLI in the J-Web interface, the configuration page
displays an error. [PR/514771: This issue has been resolved.]
In the J-Web interface, when you select the Ethernet Switching Monitor page (
> Switching > Ethernet Switching
[PR/535200: This issue has been resolved.]
In the LACP (Link Aggregation Control Protocol) Configuration page in the J-Web
interface (Configure > Interfaces > Link Aggregation), the Delete button is disabled
even when you select an aggregated Ethernet interface configured with a physical
interface, VLAN, and IP option. As a workaround, delete the physical interface, VLAN,
and IP option from the aggregated Ethernet interface using the CLI. [PR/546411: This
issue has been resolved.]
In the J-Web interface, when you use an HTTPS connection in the Microsoft Internet
Explorer browser, you cannot upload (Maintain > Config Management > Upload) or
download (Maintain > Config Management > History > Configuration History) a
configuration file. As a workaround, use an HTTP connection. [PR/551200: This issue
has been resolved.]
When no line card is installed in an EX8208 switch, if you:
Navigate to the Port Monitoring page (Monitor > Interfaces) in the J-Web interface,
a pop-up window with the error message "'gridData.0' is null or not an object" is
displayed.
Select the displayed interface and click the Show Graph button, a pop-up window
with the error message "'selected FpcName' is undefined" is displayed.
[PR/562454: This issue has been resolved.]
The dashboard in the J-Web interface might not refresh automatically if you navigate
back and forth between the Dashboard page and other pages. [PR/566359: This issue
has been resolved.]
Resolved Issues in Junos OS Release 10.4 for EX Series Switches
), the MAC learning log might not display information.
Monitor
209
Advertisement
Table of Contents
