Vpns - Juniper JUNOS OS 10.4 - RELEASE NOTES REV 6 Release Note

JUNOS OS 10.4 Release Notes
Table 2: Routing Engines Displaying DIMM Information
Routing Engines
RE-S-1800x2 and RE-S-1800x4
RE-A-1800x2
Related
Documentation
54
New option introduced for the
command—Junos OS now provides the
inheritance command. This option enables you to view CLI configuration details without
inline comments marked with
[CLI User Guide]
Enhancement to the show chassis sibs
now displays an appropriate reason when a SIB transitions to the
instance, if ths SIB is taken offline using the
of the show chassis sibs command displays
[System Basics and Services Command Reference]
New option for the
ping mpls l2vpn
l2vpn and ping mpls l2circuit
you to specify the reply mode for the ping request. The
application-level-control-channel
[System Basics and Services Command Reference]
Enhancement to the output of the
command now displays DIMM information for the following
chassis hardware detail
Routing Engines:
[System Basics and Services Command Reference]
Enhancement to the
show chassis fpc
now displays accurate temperature readings for the FPC.
[System Basics and Services Command Reference]

VPNs

SCU support for VRF routing instances with vrf-table-label configured—You can
now configure source class usage (SCU) to count packets on Layer 3 VPNs configured
with the vrf-table-label statement. Include the
[edit routing-instances routing-instance-name vrf-table-label]
statement at this hierarchy level is supported only for the virtual
source-class-usage
routing and forward (VRF) instance type. Previously, you could not enable SCU when
the vrf-table-label statement was configured. Destination class usage (DCU) is not
supported when the
vrf-table-label
[VPNs, Network Interfaces]
New Features in Junos OS Release 10.4 for M Series, MX Series, and T Series Routers
on page 6
show | display inheritance
no-comments
.
##
command—The
request chassis sib
--- Offlined by cli command ---
and
ping mpls l2circuit
commands provide a new option
, , and
ip-udp no-reply
show chassis hardware detail
Routers
MX240, MX480, and MX960 routers
M120 and M320 routers
command—The
source-class-usage
is configured.
Copyright © 2011, Juniper Networks, Inc.
operational mode
option for the
show | display
show chassis sibs command
state. For
Offline
command, the output
in the output.
commands—The
ping mpls
reply-mode that enables
option provides the
reply-mode
options.
command—The
show
command
show chassis fpc
statement at the
hierarchy level. The