Table of Contents
Advertisement
JUNOS OS 10.4 Release Notes
150
DOCSIS Mini-PIM
On SRX210 devices, the DOCSIS Mini-PIM delivers speeds up to a maximum of 100
Mbps throughput in each direction.
Dynamic Host Configuration Protocol (DHCP)
SRX Series and J Series devices do not support DHCPv6 client authentication.
NOTE: Existing DHCPv4 configurations in the [
hierarchy are not affected when you upgrade to Junos OS Release 10.4
from an earlier version or enable DHCPv6 server.
Dynamic VPN
SRX100, SRX210, and SRX240 devices have the following limitations:
The IKE configuration for the dynamic VPN client does not support the hexadecimal
preshared key.
The dynamic VPN client IPsec does not support the Authentication Header (AH)
protocol and the Encapsulating Security Payload (ESP) protocol with NULL
authentication.
When you log in through the Web browser (instead of logging in through the dynamic
VPN client) and a new client is available, you are prompted for a client upgrade even
if the
option is configured. Conversely, if you log in using the dynamic
force-upgrade
VPN client with the
force-upgrade
automatically (without a prompt).
Flow and Processing
On SRX Series devices, data plane logs generated in event mode (under
) or logs sent via NSM (under
log mode options
utilization dramatically, impacting the system stability, especially in chassis cluster
mode.
On SRX100 devices, multicast data traffic is not supported on IRB interfaces.
The service-point zone parameter for the SRX Series MGW configuration is not
supported in Junos OS Release 10.4.
You cannot configure route policies and route patterns in the same dial plan.
You can configure no more than four members in a station group. Station groups are
used for hunt groups and ring groups.
On J Series devices, even when forwarding options are set to drop packets for the ISO
protocol family, the device forms End System-to-Intermediate System (ES-IS)
adjacencies and transmits packets because ES-IS packets are Layer 2 terminating
packets.
edit system services dhcp
option configured, the client upgrade occurs
set system syslog
Copyright © 2011, Juniper Networks, Inc.
]
set security
) can increase CPU
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOS OS 10.4 - RELEASE NOTES REV 6 and is the answer not in the manual?
Questions and answers