Juniper JUNOS OS 10.4 - RELEASE NOTES REV 6 Release Note page 33

Hide thumbs Also See for JUNOS OS 10.4 - RELEASE NOTES REV 6:
Table of Contents

Advertisement

Copyright © 2011, Juniper Networks, Inc.
New Features in Junos OS Release 10.4 for M Series, MX Series, and T Series Routers
The following table shows the RADIUS attributes that are now supported for defining
a tunnel.
Attribute
Number
Attribute Name
64
Tunnel-Type
65
Tunnel-Medium-Type
66
Tunnel-Client-Endpoint
67
Tunnel-Server-Endpoint
69
Tunnel-Password
82
Tunnel-Assignment -Id
83
Tunnel-Preference
90
Tunnel-Client-Auth-Id
91
Tunnel-Server-Auth-Id
The following table shows the RADIUS VSAs that are now supported for defining a
tunnel.
Attribute
Number
Attribute Name
26-8
Tunnel-Virtual-Router
26-9
Tunnel-Password
26-33
Tunnel-Max-Sessions
26-64
Tunnel-Group
Description
The tunneling protocol to use (in the case of a tunnel
initiator) or the tunneling protocol already in use (in
the case of a tunnel terminator).
Only L2TP tunnels are currently supported.
Transport medium to use when creating a tunnel for
protocols that can operate over multiple transports.
Only IPv4 is currently supported.
Address of the initiator end of the tunnel.
Address of the server end of the tunnel.
Password used to authenticate to a remote server.
Indicates to the tunnel initiator the particular tunnel to
which a session is assigned.
If more than one set of tunneling attributes is returned
by the RADIUS server to the tunnel initiator, this
attribute is included in each set to indicate the relative
preference assigned to each tunnel.
Included in the Tunnel-Link-Start, the
Tunnel-Link-Reject, and the Tunnel-Link-Stop packets
(LAC only).
Name used by the tunnel initiator during the
authentication phase of tunnel establishment.
Name used by the tunnel terminator during the
authentication phase of tunnel establishment.
Description
Virtual router name for tunnel
connection.
Tunnel password in clear text.
Maximum number of sessions
allowed in a tunnel.
Name of the tunnel group
(profile) assigned to a domain
map.
Value
string:
tunnel-virtual-router
string:
tunnel-password
integer: 4-octet
string:
tunnel-group-name
33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents