Errata And Changes In Documentation For Nsm Release 2010.3; Errata - Juniper NETWORK AND SECURITY MANAGER - RELEASE NOTES REV 3 Release Note

Table of Contents

Network and Security Manager 2010.3 Release Notes

Errata and Changes in Documentation for NSM Release 2010.3

461264—At times, an update on an SRX Series device fails with the error message

"Previous commit in progress". This may happen when a previous commit is still being

executed on the device in the background; for example, during an IDP policy compilation.

For a workaround, see

http://kb.juniper.net/KB16548

policy compilation, the workaround is to add the device again.

477359—The private edit mode used in SRX Series clusters does not block NSM.

480097—You cannot add an SRX Series cluster member in the auto-import

configuration list.

514021—The model number of SRX devices is incorrectly displayed under Hardware

Inventory.

515796—NSM UI displays the virtual chassis option for all OS versions of SRX low-end

(100/210/240/650) devices, but does not support SRX devices running versions earlier

than Junos OS Release 10.1.

515845—NSM UI does not display the correct hardware inventory output for devices

in an SRX Series virtual cluster.

516144—NSM allows adding an SRX Series virtual chassis as a cluster member.

517276— NSM does not display logs for the backup device in an SRX Series virtual

chassis in the Log viewer.

517284—IDP Detector Engine update does not work for both devices in an SRX Series

virtual cluster.

519796—NSM does not display SRX Series virtual chassis details in Device Monitor.

The following section provides the documentation errata for this release.

This section lists outstanding issues with the documentation.

Revision 1 of the Network and Security Manager Installation Guide, dated August 2010,

contains incorrect information:

. If the error is not due to an IDP

Table of Contents

Network and security manager