Table of Contents
Advertisement
JUNOS OS 10.4 Release Notes
126
Application Layer Gateways (ALGs)
The
show security alg msrpc object-id-map
option to permit the output to be restricted to a particular node or to query the entire
cluster. The
show security alg msrpc object-id-map node
<node-id | all | local | primary>
AppSecure
On SRX1400, SRX3400, SRX3600, SRX5600, and SRX5800 devices, when you create
custom application or nested application signatures for Junos OS application
identification, the order value must be unique among all predefined and custom
application signatures. The order value determines the application-matching priority
of the application signature.
NOTE: The order value range for predefined signatures is 1 through 32,767.
We recommend that you use an order range higher than 32,767 for custom
signatures.
The order value is set with the
application-name signature order
values by entering the
show services application-identification | display set | match order
command. You will need to change the order number of the custom signature if it
conflicts with another application signature.
Chassis Cluster
For SRX Series branch devices (SRX100, SRX210, SRX240, and SRX650), The values
for default cluster heartbeat interval and threshold were changed to 1000ms and 3
respectively from R10.4 branch platforms. In the prior releases the values for cluster
heartbeat interval and threshold defaulted to 2000ms and 8 respectively.
CLI command has a chassis cluster node
.
set services application-identification application
command. You can also view all signature order
Copyright © 2011, Juniper Networks, Inc.
CLI command options are
Advertisement
Table of Contents
