Additional References; Related Documents - Cisco ISE - Line Card ISE Configuration Manual

Software Configuration of ATM ISE Line Cards for Cisco 12000 Series Routers

Additional References

The following sections provide references related to the 4-port ATM ISE line card.

Related Documents

Related Topic
Hardware installation
New software features
FPGA upgrade
Software configuration
MPLS
MPLS
AToM
MQC
You can find additional information in the installation and configuration guide for your Cisco 12000
Series Router and in the Cisco IOS Release 12.0 documentation set.
Standards
Standards
I.362, I.363
UNI 3.x, I.610
UNI 3.x
ATM 4.0
MIBs
In addition to industry-standard Simple Network Management Protocol (SNMP) and other Management
Information Bases (MIBs) supported on the Cisco 12000 Series Router, the 4-Port ATM ISE line card
supports the following:
•
•
•
•
•
•
•
•
Document Title
4-Port ATM ISE Line Card Installation and Configuration
Release Notes for Cisco 12000 Series Routers for Cisco IOS Release 12.0 S
Field Diagnostics for the Cisco 12000 Series Internet Router
Cisco IOS Release 12.0 Wide-Area Networking Configuration Guide
Multiprotocol Label Switching on Cisco Routers
MPLS Virtual Private Networks
Any Transport over MPLS
Modular Quality of Service Command-Line Interface
ATM-MIB
CISCO-AAL5-MIB
CISCO-ATM-EXT-MIB
IF-MIB
SONET-MIB
CISCO-IETF-ATM2-PVCTRAP-MIB
MPLS-TE-MIB
CISCO-QUEUE-MIB
Title
AAL5 reassembly and segmentation
F4 and F5 flows of OAM cells and OAM management
Interim Local Management Interface (ILMI)
ATM Forum Traffic Management Specification 4.0
Additional References
Cisco IOS Release 12.0(27)S
91