Cisco ISE - Line Card ISE Configuration Manual page 46

How to Configure AToM VCs on the 4-Port ATM ISE Line Card
•
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
interface atmslot/port
Example:
Router(config)# interface atm1/0
Step 4
no ip address
Step 5
no ip directed-broadcast
Step 6
atm clock internal
Cisco IOS Release 12.0(27)S
46
The number of cells that can be packed varies from 2 to 28.
enable
configure terminal
interface atmslot/port
no ip address
no ip directed-broadcast
atm clock internal
atm mcpt-timers [timer1-timeout timer2-timeout timer3-timeout]
no atm enable-ilmi-trap
no atm ilmi-keepalive
cell-packing cells mcpt-timer timer
xconnect
Software Configuration of ATM ISE Line Cards for Cisco 12000 Series Routers
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
•
Enters global configuration mode.
Specifies an ATM interface.
Disables IP processing.
Disables translation of a directed broadcast to physical
broadcasts.
Causes the ATM interface to generate the transmit clock
internally.