Additional References; Related Documents - Cisco ASR 9000 Series Configuration Manual

Additional References

RP/0/RSP0/CPU0:router(config-t1)# channel-group 0
RP/0/RSP0/CPU0:router(config-t1-channel_group)# timeslots 1-24
RP/0/RSP0/CPU0:router(config-t1-channel_group)# exit
RP/0/RSP0/CPU0:router(config-t1)# lnm syslog
RP/0/RSP0/CPU0:router(config-t1)# lnm remove set line-code-violation 1544
path-code-violation 320 duration 10
RP/0/RSP0/CPU0:router(config-t1)# lnm minor-warning set line-code-violation 154
path-code-violation 145 duration 10
QoS on T3 Channels: Example
QoS on the T3 channels is supported for both PPP and HDLC encapsulation. The following example
shows a typical QoS configuration for T3 interfaces:
Additional References
The following sections provide references related to T3 and T1 controllers.

Related Documents

Related Topic
Cisco IOS XR master command reference
Cisco IOS XR interface configuration commands
Cisco ASR 9000 Aggregation Services Router Interface and Hardware Component Configuration Guide
488
Configuring Clear Channel T3/E3 and Channelized T3 and T1/E1 Controllers on the Cisco ASR 9000 Series Router
class-map VOIP
match dscp EF
end-class-map
class-map OAM
match dscp AF43
end-class-map
!
Policy-map T3-no-priority
class OAM
bandwidth percent 30
!
class class-default
!
end-policy-map
!
Policy-map T3-priority
class VOIP
priority level 1
police rate percent 60
!
class OAM
bandwidth percent 30
!
class class-default
!
end-policy-map
Document Title
Cisco IOS XR Master Commands List
Cisco IOS XR Interface and Hardware Component Command
Reference
OL-32684-01