Oki CX1145 MFP Admin Manual page 309

8 Troubleshooting
Error Code
2B50
2B51
2B60
2B70
2B71
2B80
2B90
2BA0
2BA1
2BB0
2BB1
2BC0
2BC1
2BD0
2BE0
2BF0
308 TopAccess Error Messages
Message
Failed to process image.
Failed to process print image.
The folder was renamed. A folder of the
same name already existed.
The document was renamed. A document
of the same name already existed.
The storage period of e-Filing documents
will expire
The HDD for storing e-Filing data is run-
ning out of space.
Insufficient Memory.
Invalid Box password specified.
Incorrect paper size
Job canceled
Power failure occurred
System fatal error.
Failed to acquire resource.
Power failure occurred during restoring.
Failed to obtain the machine parameters.
Reached the maximum number of pages.
Corrective Action
Turn the power OFF and then back ON.
Retry the scan. If the error still occurs,
contact your service representative.
Make sure that the Function List can be
printed out. Retry the print. If the error still
occurs, contact your service representa-
tive.
The same named folder cannot be created
in the same box.
The same named document cannot be
created in the same box or folder.
Check if necessary documents are stored
in e-Filing. The documents will be deleted
in few days.
Delete unnecessary documents in e-Filing.
Turn the power OFF and then back ON.
Retry the scan. If the error still occurs,
contact your service representative.
Make sure that the password is correct
and retry the scan, or reset the password
and retry the scan. When this error occurs
for the print of the data in the e-Filing, per-
form the print with the administrator's
password. If the recovery is still not com-
pleted or in case of invalid password for
the operation other printing (opening the
file, etc.), contact your service representa-
tive.
Make sure to specify the supported paper
size.
(Job was canceled.)
Make sure that the power cable is con-
nected properly and it is inserted securely.
Resend the job.
Turn the power OFF and then back ON.
Retry the scan. If the error still occurs,
contact your service representative.
Turn the power OFF and then back ON.
Retry the scan. If the error still occurs,
contact your service representative.
Make sure that the power cable is con-
nected properly and it is inserted securely.
Resend the job.
Turn the power OFF and then back ON.
Retry the scan.
Reduce the pages and print again.