Setting Up The Dns Session - Oki CX1145 MFP Admin Manual

7 TopAccess Administrator Mode

Setting up the DNS Session

In DNS Session, you can specify the DNS server to enable the FQDN (Fully Qualified Domain
Name) rather than the IP address on specifying each server address such as SMTP server,
POP3 server, and LDAP server.
When the DNS service is enabled and the DNS server supports the dynamic DNS service,
please set the DDNS Session as well.
P.129 "Setting up the DDNS Session"
1
2
3
4
5
1) Enable DNS
Select whether the DNS server is used or not.
2) Primary DNS Server Address
Specify the IP address of the primary DNS server when the DNS service is enabled.
3) Secondary DNS Server Address
Specify the IP address of the secondary DNS server when the DNS service is enabled, as
you require.
4) Primary DNS Server Address(IPv6)
Specify the IP address of the primary DNS server when the DNS service is enabled in IPv6.
5) Secondary DNS Server Address(IPv6)
Specify the IP address of the secondary DNS server when the DNS service is enabled in
IPv6, as required.
When the "Obtain a Domain Server Address automatically" option (For IPv6, "Use DHCPv6
Server for options"option) is enabled in the TCP/IP settings, the server address of the primary
and secondary DNS server addresses can be obtained using the DHCP server.
P.120 "Setting up the TCP/IP (IPv4)"
P.123 "Setting up the IPv6"
128 Setting up from TopAccess