Oki CX1145 MFP Admin Manual page 179

7 TopAccess Administrator Mode
3
In the Printer submenu page, set the Printer settings as required.
To set the Printer Settings, see the following:
4
Click [Save].
The confirmation dialog box appears.
If you want to restore the current settings without saving the changes, click [Cancel].
Clicking [Cancel] cannot restore the defaults. This can only clear the changes and
restore the current settings before saving the changes.
5
Click [OK] to apply the changes.
When using the Internet Explorer, the settings that are displayed in each field may not be
changed even if you change the settings and click [Save]. However, the settings have
been changed in the equipment. In that case, click the Printer submenu then the page
displays the current settings in each field.
178 Setting up from TopAccess
P.179 "Setting up the General Setting"
P.179 "Setting up the Default Raw Job Setting"
P.180 "Setting up the Raw Job Setting"