Setting Up The Copier Settings - Oki CX1145 MFP Admin Manual

5
Click [OK] to apply the changes.
When using the Internet Explorer, the settings that are displayed in each field may not be
changed even if you change the settings and click [Save]. However, the settings have
been changed in the equipment. In that case, click the Copier submenu then the page
displays the current settings in each field.

Setting up the Copier Settings

In Copier Settings, you can set the default copier settings that apply for copy operation from the
Touch Panel Display.
1
2
3
4
5
6
7
8
9
10
11
12
1) Color Mode
Select the default color mode for copying.
Only "Black" can be selected when the No Limit Black function is enabled.
2) Original Mode for Color*
Select the default original mode for color originals.
3) Original Mode for Black
Select the default original mode for black/white originals.
4) Exposure for Color
Select the type of image density for color copy.
- Auto — Select this to set the Auto mode as the default exposure for color copy. The
Auto mode automatically detects the density of the original to make copies at the opti-
mum exposure.
- Manual — Select this to set the Manual mode as the default exposure for color copy.
The manual mode manually specifies the density of the original.
5) Exposure for Black
Select the type of image density for black and white copy.
Setting up from TopAccess 159